Model: 3/2-way Solenoid Valve

• Electrical connection cable plug, Form A
• With or without manual override as standard
• Threaded port and sub-base versions
• Impulse version optional

Technical data

Body material                           Brass or stainless steel, polyamide (sub-base)

Seal material                             FKM (EPDM on request)

Medium                               Neutral gases and fl uids (e.g. compressed air,

town gas, natural gas, water, hydraulic oil, petrol).

Suitable for technical vacuum

Medium temperature                -10° to +100°C (PA coil) to 120°C Epoxy coil

 Polyamide coil (FKM seal)

Ambient temperature                   -10 to +55°C

Viscosity                             Max. 21 mm2/s

Port connection                        G 1/8, G 1/4, sub-base

Operating voltage                      24 V DC, 24 V/50 Hz, 230 V/50 Hz

(other voltages on request)

Voltage tolerance                         ±10%

Duty cycle / single valve                    100% continuous rating

 Assembly                              Intermittent operation 60% (30 min) or

with 5 W coil (on request)

Electrical connection

 According to                          DIN EN 175301-803 Form A for Cable Plug,Type

2508 (see Ordering chart for accessories)

Installation                           As required, preferably with actuator upright

Protection class                         IP65 with Cable Plug

Coil insulation class                      Polyamide class B (Epoxy class H on request)

Coil material                            Polyamide (Epoxy on request)

Orifice                                  DN 1.5- 2.5