Product Details
Pneumatic Globe Valve
Product Introduction
Automated fluid control valve with gate valve body, pneumatic actuator, control accessories & core parts (disc, seat, stem).
Compressed air-powered (solenoid valve for airflow control) drives stem linear motion to control disc-seat engagement for fluid on/off. Optional positioner achieves precise flow/pressure regulation via 4-20mA signal. Forced-seal design ensures no leakage; fast response, integrable with PLC/DCS, suitable for industrial automation pipelines.
Quick Inquiry
Product Detail
I. Product Parameters
1. Material Parameters
• Valve Body / Valve Cover / Valve Disc: Cast steel (WCB, for general medium and low pressure applications), stainless steel (304/316, for corrosion-resistant applications), chrome-molybdenum steel (WC6/WC9, for high temperature and high pressure applications)
• Sealing Surface: Stainless steel hard alloy overlay (wear-resistant and high-pressure resistant), PTFE soft seal (zero leakage at low pressure)
• Valve Stem: 2Cr13 stainless steel, 304 stainless steel (corrosion-resistant, anti-locking)
• Pneumatic Actuator: Cast aluminum housing (lightweight and rust-proof), optional stainless steel housing (for highly corrosive environments)
2. Specification Parameters
• Nominal Diameter: DN15~DN300 (corresponding to 1/2"~12")
• Nominal Pressure: PN16, PN25, PN40, PN63 (suitable for medium and high pressure pipeline systems)
• Connection Method: Flange connection (GB/T, ANSI, DIN) 1. Standard), Threaded Connection (Small Diameter)
• Air Source Pressure: 0.4~0.7MPa (Compressed Air Driven)
3. Control and Operating Parameters
• Actuator Type: Double-acting (holds position upon air loss), Single-acting (Spring return, returns to position upon air loss)
• Control Accessories: 2-position 5-way solenoid valve, Limit switch (valve position feedback), Electric positioner (dedicated for regulating type, receives 4-20mA signal)
• Protection Rating: Actuator IP65 (standard dustproof and waterproof), optional IP67 (high protection)
• Explosion-proof Rating: Optional Ex d II BT4/Ex d II CT6 (suitable for flammable and explosive environments)
• Operating Temperature: -29℃~425℃ (WCB material); -29℃~595℃ (WC6/WC9 material); -20℃~180℃ (PTFE soft seal)
• Sealing Rating: GB/T 13927-2008 Class IV (hard seal); VI Grade 1 (Soft Seal, Zero Leakage)
II.Product Advantages
• Rapid Response and High Efficiency in Opening and Closing
In pneumatic drive mode, the valve opening and closing time is short (0.5~3 seconds), which is suitable for assembly line operations that require rapid on/off switching and fluid switching, thereby improving system operating efficiency.
• High safety redundancy: The single-acting actuator has an automatic reset function in case of gas failure. In the event of a sudden gas interruption, the valve will automatically open or close fully to prevent the pipeline medium from going out of control and improve the safety of system operation.
• Reliable sealing performance: The hard-seal version is wear-resistant and high-pressure resistant, suitable for long-term high-temperature and high-pressure working conditions; the soft-seal version can achieve zero leakage, meeting the requirements of scenarios with stringent sealing requirements.
• Wide range of adaptability: A variety of materials and protective configurations are available, which can be used for conventional water supply and drainage, HVAC pipelines, as well as complex working conditions such as chemical, petroleum, corrosive, flammable and explosive, high temperature and high pressure.
• Easy installation and maintenance
Flange/threaded connection adapts to different pipeline requirements and ensures stable installation; the actuator and valve body are easy to disassemble and separate, and the only vulnerable parts are the sealing surface and packing, resulting in low replacement costs.
III. Product Applications
• Petrochemical Industry: Pipelines for conveying crude oil, refined oil, and chemical solvents; explosion-proof type suitable for fluid cutoff and flow regulation in flammable and explosive workshops.
• In the power energy sector, the chromium-molybdenum steel version of boiler feedwater and steam pipelines in thermal power plants can withstand high temperature and high pressure conditions, ensuring stable system operation.
• Pharmaceutical and food industries: Pharmaceutical pure water systems and food and beverage processing pipelines, stainless steel models meet sanitary standards and have no risk of media contamination.
• Metallurgical and mining sector: Automated on/off control and flow regulation of fluids in smelting pipelines in metallurgical workshops and high-pressure water supply systems in mines.
• Municipal engineering field: Urban gas and high-pressure water supply and drainage networks, used for network zone control and maintenance isolation, improving network operation safety.